SKF VectoLub VE1B, Руководство по установке и пусконаладке

Страница: 33 / 40

6.6 Reservoir filling
• Remove the plug/cover from the reservoir
and fill with lubricant.
• Put back the plug/cover on the reservoir.
!
Only authorized lubricants for the
pump type may be supplied. Un-
suitable fluids may cause the unit to fail
and lead to serious material damage and
bodily injury.
!
Ensure the reservoir is filled with
lubricant that does not contain air
bubbles.
!
If the ambient air is polluted, set
aside a clean zone to fill the sys-
tem and thereby prevent foreign bodies
from entering. It is also important to
clean the reservoir cover or the filler
plugs before removing them.
7. Shutdown
7.1 Temporary shutdown
You can temporarily shut down the de-
scribed product by disconnecting the electri-
cal, pneumatic, and/or hydraulic supply con-
nections. For more information, see the
section General information in this installa-
tion instructions.
If you wish to shut down the product tem-
porarily, refer also to the instructions in the
section Transport, delivery, and storage of
this manual.
When placing the product back into op-
eration, refer to the information in the sec-
tions Installation and Commissioning of this
manual.
7.2 Permanent shutdown
All country specific legal guidelines and leg-
islation on the disposal of contaminated
equipment must be observed when shutting
down the product for the final time.
The system can also be taken back by SKF
for disposal if the costs are covered.
!
Caution!
Lubricants can contaminate the
ground and watercourses. Lubricants
must be used and disposed of properly.
Country specific regulations and laws on
the use and disposal of lubricants must
be observed.
31