2. Lubricants
2.1 General
!
All SKF products must only be
used for their intended purpose
and in accordance with the specifications
of the installation instructions for the
product in question.
The intended use of this product is for the
centralized lubrication/lubrication of bear-
ings and wear points with lubricants. All
physical limitations of use stipulated in the
documentation of the product such as the
owner’s manual, technical drawings and cat-
alogs must be observed.
More specifically, we call your attention to
the fact that substances and mixtures classi-
fied as hazardous by the Annex I part 2-5 of
the CLP regulation (EC 1272/2008), and
identified with hazard pictograms GHS01-
GHS06 and GHS08, can only be used to feed
the SKF centralized lubrication systems,
transported or distributed by these systems
after consultation with SKF and obtaining
written permission.
All products manufactured by SKF are not
approved for use in conjunction with gases,
liquefied gases, pressurized gases in solution
and fluids with a vapor pressure exceeding
normal atmospheric pressure (1013 mbars)
by more than 0,5 bar at their maximum per-
missible temperature.
Should there be a need to use the product
to convey media other than lubricants or
hazardous substances, this must be dis-
cussed with SKF first and the company must
give express written permission.
In the opinion of SKF, lubricants constitute
a design element that must be considered
when selecting components and designing
centralized lubrication systems. The lubrica-
tion properties of the lubricants in question
must be considered.
10
Содержание VectoLub VE1B
Страница 2: ......
