SKF TKGT 1, Инструкция по эксплуатации

Страница: 9 / 47

9 SKF TKGT 1
3. Analysis Protocol
The proposed protocol is shown in the table below. Information collected and test results
obtained in each part can be reported in the report template printable from the CD.
3.1 Collecting information 3.1.1 Application conditions
3.1.2 Grease in use
3.2 Collecting samples 3.2.1 Material
3.2.2 Sampling procedure
3.2.3 Recommendations
3.3 First Visual inspection 3.3.1 Examples
3.4 Consistency test 3.4.1 Principle of operation
3.4.2 Material
3.4.3 Test Procedure
3.4.4 Recommendations
+
3.5 Oil bleeding test 3.5.1 Principle of operation
3.5.2 Material
3.5.3 Test Procedure
3.5.4 Recommendations
3.6 Contamination test 3.6.1 Principle of operation
3.6.2 Material
3.6.3 Test Procedure
3.6.4 Recommendations
3.7 Reporting 3.7.1 Recommendations
3.1 Collecting information
The ability of grease to lubricate correctly depends on the grease itself linked with external
parameters. It is strongly recommended to collect as much information as possible on the
application conditions and grease type used. The information collected can greatly help in
interpreting the results.
For example:
A softening of grease can be caused by excessive vibrations, oil contamination, housing
overilled, and so on.
Knowing vibration levels, inding an oil can nearby the application or revising the amount of
lubricant put at each relubrication interval can simplify analysis.