35
11 IF-105 settings
11.1 General
Set values are lubrication channel basic values, for example lubrication cycle and maximum pressurization
time. Set values are channel specific.
All settings are password-protected.
11.2 Entering password
15 Select the code for the setting to be changed on the display with the
-button.
16 Press the SET-button.
17 Display shows code PPP.
18 In a moment the first character of the display starts to blink.
19 Select with the
-button the first number of the password on the display.
20 Move to the next character with the
-button.
21 When all three numbers of the password have been entered, press the SET-button.
22 Once the password has been entered correctly, code ACC is displayed and the set values can be
changed during the next 10 minutes.
23 If the password has not been entered correctly, code Err is displayed and the display returns to normal
mode.
Note
Password for set values is 105.
11.3 Entering settings
24 Select the code for the setting to be changed on the display with the
-button.
25 Press the SET-button.
26 The first number of the value to be set is blinking on the display.
27 Select the desired number with the
-button on the display.
28 Move to the next character with the
-button.
29 The set value is saved in the memory with the SET-button.
30 Exit setting mode with the
-button. The display returns to normal mode automatically after 4 minutes if
no buttons have been used.
11.3.1 Lubrication cycle counter
Lubrication cycle counter can be reset when needed.
31 Select code Cou for the lubrication cycle counter on the display with the
-button.
32 Reset the counter with the SET-button.
11.3.2 Lubrication cycle
Lubrication cycle set value is displayed as hours and minutes. Decimal point is used to separate hours and