manualshive.com logo in svg

SKF Matrix MAX1, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
SKF Matrix MAX1 Скачать руководство пользователя страница 2

1  General information 

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 5

1.1   Information on this manual   . . . . . . . . . . . . . . . . . . . . .  

 5

1.2   Explanation of symbols    . . . . . . . . . . . . . . . . . . . . . . . .  

 6

1.3   Limitation of liability  . . . . . . . . . . . . . . . . . . . . . . . . . . .  

 6

1.4   Copyright   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

  7

1.5   Spare parts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

 7

1.6   Warranty terms   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

 7

1.7   Customer service   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

 7

2 Safety

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 8

2.1   Use    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

 8

2.1.1  Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . .  

 8

2.1.2  Unintended and excluded use . . . . . . . . . . . . . . .  

 9

2.1.3  Essential performance  . . . . . . . . . . . . . . . . . . . .  9

2.2   Responsibility of the owner and processor   . . . . . . . . . .  

 8

2.3   Personnel requirements    . . . . . . . . . . . . . . . . . . . . . . .  

 9

2.3.1  Qualifications   . . . . . . . . . . . . . . . . . . . . . . . . . . .  

 9

2.4   Specific dangers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    10
2.5  Safety equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    11
2.6   Safeguard against restart    . . . . . . . . . . . . . . . . . . . . . .    13
2.7   Changes and to the device   . . . . . . . . . . . . . . . . . . . . . .    13

2.7.1  Warning labels  . . . . . . . . . . . . . . . . . . . . . . . . . .    15
2.7.2  Information labels   . . . . . . . . . . . . . . . . . . . . . . .    15

2.8   Manufacturer’s declaration of EMC compliance    . . . . . .    16

3  Technical data 

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

 24

3.1   Operating conditions   . . . . . . . . . . . . . . . . . . . . . . . . . .    24
3.2   Product label   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24

4  Structure and function 

  . . . . . . . . . . . . . . . . . . . . . . . . . . .

   25

4.1   Overview   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    25

4.1.1  Matrix MAX1 and MAX3    . . . . . . . . . . . . . . . . . .    25
4.1.2  Matrix MAX6   . . . . . . . . . . . . . . . . . . . . . . . . . . .    25

4.2  Brief description    . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    26
4.3   Special features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    27
4.4   Construction group description    . . . . . . . . . . . . . . . . . .    28
4.5  Requirement for 3rd party power supply   . . . . . . . . . . .  28
4.6   Connections   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    29
4.7   Operating elements   . . . . . . . . . . . . . . . . . . . . . . . . . . .    30
4.8   Options    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    31

4.8.1  Emergency lowering device   . . . . . . . . . . . . . . . .    31
4.8.2  Quick adjustment  . . . . . . . . . . . . . . . . . . . . . . . .    31
4.8.3  Electrical pinch protection   . . . . . . . . . . . . . . . . .    32
4.8.4  Life span display    . . . . . . . . . . . . . . . . . . . . . . . .    33
4.8.5  Mechanical pinch protection    . . . . . . . . . . . . . . .    33
4.8.6  Master slave actuator function  . . . . . . . . . . . . . .    33
4.8.7  Impulse transmitter   . . . . . . . . . . . . . . . . . . . . . .    33

4.9   Accessories    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    34

Contents

5  Transport, packaging and storage 

. . . . . . . . . . . . . . . . . . .

   35

5.1   Safety information for the transport . . . . . . . . . . . . . . .  35
5.2   Transport inspection    . . . . . . . . . . . . . . . . . . . . . . . . . .    35
5.3   Return to the manufacturer   . . . . . . . . . . . . . . . . . . . . .    36
5.4   Packaging    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    36
5.5   Storage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    37

6  Installation and first operation 

  . . . . . . . . . . . . . . . . . . . . .

   38

6.1   Installation location   . . . . . . . . . . . . . . . . . . . . . . . . . . .    39
6.2   Inspections prior to first operation   . . . . . . . . . . . . . . . .    39
6.3   Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    41
6.4   Connection to the control Unit   . . . . . . . . . . . . . . . . . . .    44
6.5   Connection to operating element   . . . . . . . . . . . . . . . . .    47

6.5.1  Connect MAX1 and MAX3 to operating element     47
6.5.2  Connect MAX6 to operating element   . . . . . . . . .    47

6.6   Connect to power supply   . . . . . . . . . . . . . . . . . . . . . . .    51

6.6.1  Connect MAX1 and MAX3 to power supply    . . . .    51
6.6.2  Connect MAX6 to energy supply    . . . . . . . . . . . .    51

6.7   Requirements concerning the installation of the
 

actuators with options   . . . . . . . . . . . . . . . . . . . . . . . . .    54
6.7.1  Emergency lowering device   . . . . . . . . . . . . . . . .    54
6.7.2  Quick adjustment  . . . . . . . . . . . . . . . . . . . . . . . .    55
6.7.3  Electrical pinch protection   . . . . . . . . . . . . . . . . .    55
6.7.4  Mechanical pinch protection    . . . . . . . . . . . . . . .    56
6.7.5  Master-slave actuator function   . . . . . . . . . . . . .    56

7 Operation 

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

   59

7.1   Safety    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
7.2   Turn on    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    60
7.3   Turn off   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60
7.4   Action before Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    61
7.5   Action during the operation   . . . . . . . . . . . . . . . . . . . . .    62

7.5.1  Normal operation    . . . . . . . . . . . . . . . . . . . . . . .    62
7.5.2  Operate emergency lowering device    . . . . . . . . .  62
7.5.3  Operate quick adjustment   . . . . . . . . . . . . . . . . .  64

7.6   Disengagement in case of emergency   . . . . . . . . . . . . .    67

7.6.1  Shut down MAX1 and MAX3   . . . . . . . . . . . . . . .    68
7.6.2  Shut down MAX6  . . . . . . . . . . . . . . . . . . . . . . . .  69

7.7   Action after use   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69

2

Содержание Matrix MAX1

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды