SKF Lincoln PowerLuber AC2400, Руководство по установке и обслуживанию

Страница: 4 / 16

Tool use and care
• Do not use the PowerLuber if the switch
does not turn it on and off. A PowerLuber
that cannot be controlled with the switch
is dangerous and must be repaired.
• Disconnect the plug from the power
source before making any adjustments,
changing accessories or storing
PowerLuber. Such preventive safety
measures reduce the risk of starting the
PowerLuber accidentally.
• Store idle PowerLubers out of the reach of
children and do not allow persons unfa-
miliar with the PowerLuber or these
instructions to operate it. PowerLubers
are dangerous in the hands of untrained
users.
• Maintain PowerLubers. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condition
that may affect the PowerLuber’s opera-
tion. If damaged, have the PowerLuber
repaired before use.
• Be sure your power supply agrees with
the nameplate marking. Voltage decrease
of more than 10% will cause loss of power
and overheating. If this tool does not
operate, check power supply.
• Do not continue to hold down trigger if
grease gun is stalled. This could damage
the motor or cause fire.
• Use only accessories that are recom-
mended for this model. Only accessories
that are capable of handling 7,000 psi
(482 bar) should be used.
!
Notice
Grease cartridges are not
included in this product.
Service
• Service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may increase the risk of injury.
• When servicing a PowerLuber, use only
Lincoln replacement parts. Use of unau-
thorized parts may increase the risk of
injury and will void the warranty.
Specifications
Basic PowerLuber model AC2400
Operating power 120 V AC
Rated current 2 A
Maximum operating pressure 7,000 psi (482 bar)
Grease reservoir capacity 14.5 oz (411 cm³)
Operating temperature range 0 to 122 °F (–18 to 50 °C)
Operating current at
– 1,000 psi (69 bar) 1.6 A
– 7,000 psi (482 bar) 2.75 A
Lubricant (grease) Up to NLGI #2
Grease output at 1,000 psi (69 bar ) (“L” setting) 3.6 oz/min. (106,5 cm³/min)
Grease output per stroke at 1,000 psi (69 bar) (“L” setting) 0.21 oz (0.62 cm³)
Weight 8.2 lbs. (3,76 kg)
Accessories
Outlet hose model 1230
Pressure rating 7,500 psi (510 bar)
Length of hose 30 in. (760 mm)
Models
Sales model Basic PowerLuber Case
AC2440 AC2400 286240
4
A &
A HYDRAULIC
800-992-9898