SKF ALEMITE 597 Series, Руководство по обслуживанию

Страница: 6 / 76


WARNING
Read all safety warnings and instruc-
tions Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury
Safety instructions
General power tool safety
warnings
2 Electrical safety
2.1 Power tool plugs must match the
outlet. Never modify plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools.
Unmodified plugs and
matching outlets will reduce risk of
electric shock
2.2 Avoid body contact with earthed
or grounded surfaces such as
pipes, radiators, ranges and
refrigerators.
There is an increased
risk of electric shock if your body is
earthed or grounded
2.3 Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock
2.4 Do not abuse the cord. Never use
cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged
or entangled cords increase the risk
of electric shock
2.5 When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of
cord suitable for outdoor use
reduces risk of electric shock
2.6 If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply.
Use of an RCD
reduces the risk of electric shock
NOTE The term "residual current
device (RCD)" can be replaced by the
term "ground fault circuit interrupter
(GFCI)" or "earth leakage circuit
breaker (ELCB)"
3 Personal safety
3.1 Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you are
tired or under the influence of
drugs, alcohol or medication.
A
moment of inattention while
operating power tools may result in
serious personal injury
3.2 Use personal protective
equipment. Always wear eye
protection.
Protective equipment
such as a dust mask, non-skid safety
shoes, hard hat or hearing
protection used for appropriate
conditions will reduce personal
injuries
3.3 Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your
finger on the switch or energising
power tools that have the switch on
invites accidents
3.4 Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left
attached to a rotating part of power
tool may result in personal injury
3.5 Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations
3.6 Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair and clothing away from
moving parts.
Loose clothes,
jewellery or long hair can be caught
in moving parts
3.7 If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards
3.8 Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore
tool safety principles.
A careless
action can cause severe injury within
a fraction of a second
Save all warnings and instructions for
future reference.
The term "power tool" in
warnings refers to mains-operated (corded)
power tool or battery-operated (cordless
power tool
1 Work area safety
1.1 Keep work area clean and well lit.
Cluttered or dark areas invite accidents
1.2 Do not operate power tools in
explosive atmospheres, such as in
presence of flammable liquids,
gases or dust.
Power tools create
sparks which may ignite the dust or
fumes
1.3 Keep children and bystanders
away while operating power tool.
Distractions can cause loss of
control
Intended use
These grease guns have been exclusively
designed to pump and dispense lubricant
using battery power Do not exceed the
maximum specification ratings
6