SKF ALEMITE 597 Series, Руководство по обслуживанию

Страница: 15 / 76

Table 3
Charging status
LED light Description
Green light flashing Charging
Green light on Battery is fully charged
Red light flashing at 4HZ Bad battery condition The charger has the ability to detect a
weak or damaged battery If this LED function occurs, do not
continue to charge the battery Return it to a service center or a
collection site for recycling
Red Light Flashing at
1HZ/5HZ Hot/cold battery When the charger detects that a battery is
excessively hot or cold, charging is suspended until the battery
has normalized Once battery is at a temperature between
40° F
(4° C) and 104° F (40° C) , the charger automatically
switches to charging mode Battery overheating could be
attributed to:
• Long continuous running
• Hot ambient temperature
• One or more cells are damaged
Battery charger
operation
Charge the battery only with the charger
provided or optional mobile charger 343289
Make sure power circuit voltage is same as
that shown on the charger specifications
plate Ensure the battery properly engages
with the charger’s contacts
The battery will become slightly warm to
the touch while charging This is normal and
does not indicate a problem
Leave battery in charger
The battery can be left connected in the
charger with the green LED glowing
indefinitely The charger will keep the battery
fresh and fully charged The charger features
an automatic tune-up mode which equals or
balances the individual cells within the
battery to enable it to function at peak
capacity Batteries should be tuned-up
weekly or whenever the battery no longer
delivers the same amount of work To use
the automatic tune-up mode, place the
battery in the charger for a minimum of
8 hours
Function of red and green
lights
When the charger is powered on, the green
light will flash one time
15