PRODUCT SPECIFICATIONS
Connector details for SKF Multilog IMx-Rail
22 (29)
SKF Multilog On-line System IMx-Rail
User Manual Supplement
Revision B
3.4 Connector details for SKF Multilog IMx-Rail
3.4.1 IMx-Rail
Table 3
IMx-Rail user connection terminals
Terminal
Description
Digital1-4
4 digital inputs (Ground, Signal, Power terminals for each)
CAN L/N
CAN bus for vehicle systems (Currently no firmware support)
GND
Ground connection for use as required by RS485 and/or CAN
485A A/B
RS485 2-wire A and B terminals (Modbus RTU for GPS module)
A1-A16
Analogue inputs 1 to 16* (Analogue, Ground terminals for each)
Connect signal to A terminal
24V
24 V DC power for relay coil (One for each relay driver output)
RS/R1/R2
Three relay driver output connections
GND
Three GND connections (unallocated/general use)
GPS Power
This can be used to power a GPS module connected to 485A
485B A/B
Not used
* A9 to A16 can be used for 2-wire PT1000 temperature sensors
