SNB-K2A AUTOMATIC EDGE BANDER MANUAL
12
6/2016
2.
The operating distance of the knurl roll may be adjusted with 4 screw bolts
represented by B (as shown in Fig.9).
Caution! Don
’
t touch work piece or edge tape when a work piece entering into or leaving
the guillotine to avoid possible inquiry. Make sure to cut off the machine
’
s power before
servicing.
Trimming the edge bander from the edge sealing belt disc.
1.
The cutting clamp begins to operate when a work piece reaches the micro switch A
in Fig.10.
Glue Tank Components
Fig. 10
A
Fig. 11
A
B
Fig. 12
A
B
