Skeeter TZX190, Руководство пользователя

Страница: 188 / 200

14-4
If you need to remove the Skeeter boat from the water without a trailer, use these guidelines:
• Use a sling-type lifting mechanism designed for lifting boats. The sling should be covered with a protective
material to prevent damage to the hull gelcoat.
• Use spreader bars to avoid side stress to the hull that may cause cracks in the gelcoat and fiberglass.
• Attach guidelines to the bow eye and stern tie-down cleats to control movement of the boat during lifting.
• Remove all people and all cargo from the boat. Drain any excess water from the bilge using the bilge pump.
• Be sure all people are standing clear, then lift boat slowly and just far enough to verify that the boat is
securely held and properly balanced. If necessary, lower the boat again and adjust the slings.
• When ready, lift the boat slowly and carefully.
TRAILERING
The manufacturer of your trailer has provided you with a vehicle designed for many years of convenient, trouble-
free service. It is up to you to use and care for it properly, to be sure that it will perform safely and satisfactorily.
Instructions on how to do this are included in the trailer owner’s manual. Read, learn, understand and act on the
information included in this important book. Proper trailer maintenance and safety procedures are essential to
safe and enjoyable trailering.
STORAGE
Read, understand and follow the instructions for trailer ownership and use in the
trailer owner’s manual included with your Skeeter owner’s package.
WARNING
Section 14_horiz 11/3/03 2:46 PM Page 14-4