Advanced Setup
Intermittent Sampling
Intermittent Sampling allows the pump to be programmed to run for a specific
number of minutes up to 999, to shut off for a programmed
length of time, and to continue sampling on and off for a
predetermined number of cycles (e.g., program the pump
to run three cycles (n) of 15 minutes each (r) with a five-
minute delay (d) between each cycle).
Entering Intermittent Sampling Mode
Press
or
to scroll to Intt. Press
to enter the intermittent sampling setup
mode.
Setting Run Time (r)
1. Press
or
to increase or decrease run time. The display will flash. If no change
to run time is desired, press
to move to delay time.
2. When finished, press
. Stor will flash on the display.
To save new setting:
Press [
]. Press
to move to
delay time setup.
To ignore new setting:
Press
. Display will move to
the delay time.
If displayed values are not changed, the flashing Stor will not appear and
pressing
will move the display to the next parameter to be set.
Digital display:
Intermittent Sampling
Digital display:
Set run time
Setting Delay Time (d)
1. Press
or
to increase or decrease delay time. The
display will flash. If no change to delay time is desired,
press
to move to number of cycles.
2. When finished, press
. Stor will flash on the display.
To save new setting:
Press [
]. Press
to move to
number of cycles setup.
To ignore new setting:
Press
. Display will move to the number of cycles.
Digital display:
Set delay time