Continuous Run with Manual Stop
Run time accumulates only while pump is running.
Continuous Run mode performs one sample from 1 to
999 minutes, then automatically resets to zero and counts
up to 999 again until the user manually stops the pump.
1. Press
or
to scroll to Cont. Press [
] to select it.
The pump will start and the LED will display cumulative run time up to
59 seconds in seconds, then switch to minutes. The timer will count up to
999 minutes, automatically reset to zero, and count up to 999 minutes again
until the user manually stops the pump.
2. Press [
] to place the pump in Hold when the desired sampling time has
elapsed. The LED will display cumulative run time and Hold alternately.
To continue sample run:
Press [
].
To terminate sample and reset pump:
Press
while in Hold.
Sample Reset (rSEt) will flash on the LED. Press [
].
User Options During Continuous Run Sampling
Viewing battery status
Press
. Display will automatically return to
cumulative run time after five seconds or press
again.
Hold mode
Press [
] while the sample is running to
place the pump and timer in Hold. Hold and
cumulative run time will display alternately.
Press [
] while in Hold to continue the
sample run.
Terminating a sample and resetting the pump
Press
while in Hold. Sample Reset (rSEt) will
flash on the LED.
To terminate sample and reset pump:
Press [
].
To continue sample run:
Press
to return the display to Hold.
Press [
].
Digital display:
Continuous Run
For Intermittent Sampling, see Advanced Setup.