manualshive.com logo in svg

SKC AirChek2000, Руководство по эксплуатации

Поделиться
Скачать
SKC AirChek2000 Скачать руководство пользователя страница 33

30

DataTrac 2000 Software

With the optional DataTrac 2000 So

ft

 ware accessory, the AirChek 2000 

is programmable using a PC. DataTrac 2000 simpli

fi

 es chain-of-custody 

reporting by allowing users the option of programming a complete running 
sequence, delayed start, timed stop, and intermi

tt

 ent sampling, all at 

di

ff

 erent 

fl

 ow rates. Time and sample volume are continuously updated in 

memory. There is no need to perform lengthy calculations; DataTrac does it 
for you. The advanced information retrieval system is speci

fi

 cally designed 

to store data and provide chain-of-custody information. Fault features allow 
storage of historical data in memory that can be retrieved days later as long 
as the ba

tt

 ery pack is not completely discharged.

Features

•  Program a sampling operation from a PC
•  Calibrate the AirChek 2000 

fl

 ow rate to a primary standard

•  Display the AirChek 2000 operating state including 

fl

 ow rate, 

temperature, run time, and ba

tt

 ery status

•  Create and save an AirChek 2000 program on a PC and upload to the 

pump for operation in the 

fi

 eld.

•  Program up to ten sampling sequences, each with di

ff

 erent 

fl

 ow rates

•  Download the AirChek 2000 run time data and history to your PC
•  Create chain of custody information using the sample set-up feature
•  Print a history 

fi

 le containing AirChek 2000 run time data  

 

•  Print a worker exposure pro

fi

 le containing run time data and the AirChek 

2000 history

•  Document date of pump calibration and validate information when using 

the CalChek Automatic Calibration feature (DataTrac 2000 version 3.59 or 
higher)

DataTrac 2000 Requirements

•  Any IBM-compatible PC with a 386 processor or higher
•  Hard drive with a minimum of 8 MB free disk space
• CD drive
•  4 MB RAM (8 MB preferred)
•  VGA display or be

tt

 er

•  Available 9 or 25-pin serial port (i.e., a COM port not used by a mouse, 

modem, or other device) or appropriate adapter compatible with PC and 
operating system

• Mouse
•  Microso

ft

 

®

 Windows

®

 98 or higher

DataTrac 2000 Software

Includes software on CD, adapter, and serial cable. (Requires Microsoft 
Windows 98 or higher and serial port or appropriate adapter compatible with 
PC and operating system) .......................................................Cat. No. 877-91

Accessories

Содержание AirChek2000





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды