manualshive.com logo in svg

SKC 901-4011, Руководство по эксплуатации

Поделиться
Скачать
SKC 901-4011 Скачать руководство пользователя страница 7

www.skcltd.com 

007-01-014 Issue A 

Page 5

General Information

1) Pump Model

901-4011

High flow sample pump 2 - 20 litre/min (without battery)

2) Care of the Flite4 Pump

• 

The Flite4 pump is supplied complete with a rubber dust cap for the inlet hosetail and a screw-in dust cap for the 

charging/power socket. Please ensure that these are fitted at all times when the pump is not in use or being charged.

• 

Never run the Flite4 pump without a filter in line to prevent dust from contaminating the pump mechanism.

• 

Always use the correct SKC battery and battery charger designated for the Flite4 pump.

• 

The Flite4 pump casing is IP20 rated, it is not rated as water or splashproof and therefore must not be used where it is 

possible for water to enter the pump casing, and care must be taken when cleaning the pump to prevent water ingress.

Warning - Failure to follow these guidelines will void the product warranty.

3) Waste Electrical and Electronic Equipment

This product is marked with the crossed out wheelie bin symbol, which identifies that it falls within the scope 

of the EU Directive 2002/96/EC and the 2013 UK Regulations on waste electrical and electronic equipment 

(WEEE). At the end of it’s useful life, this product must be disposed of in an environmentally sound way as 

detailed in the Directive / Regulations. Note that the battery must be separated from the pump and disposed 

of as detailed in Waste Batteries below. Please contact your local distributor or SKC Ltd for further details on 

how to comply with these requirements. SKC Ltd’s producer registration number is WEE/KH0054TQ.

4) Waste Batteries

The lead/acid batteries supplied for use with this pump, fall within the scope of the EU Directive 2006/66/EC and the 

2009 UK Regulations on batteries and accumulators and waste batteries and accumulators. At the end of a battery’s life 

it must be disposed of in an environmentally sound way as detailed in the Directive / Regulations. Please contact your 

local distributor or SKC Ltd for further details on how to comply with these requirements. SKC Ltd’s batteries producer 

registration number is BPRN00454.

Содержание 901-4011









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды