Skandika NEMO V, Руководство пользователя

Страница: 45 / 76

45
GB
CHEST BELT INSTRUCTIONS
A compatible chest belt is able to detect your heartrate and will transfer this information to
the computer by wireless signal. Each heart rate signal received by the built-in receiver will
be accompanied by a flashing heart symbol. The measurement with a chest belt (optional)
is a very accurate measurement and is unaffected by disturbances. The wireless signal is
transmitted via low frequency (5.3 kHz) tech-nique. Maximum transmission range: 130 cm.
The chest belt needs 1 pc. of CR2032 battery.
How to wear the chest belt
You may adjust the strap to a comfortable length. However, the electrodes must have con-
tact with your skin in order to measure your heart rate correctly. It may last up to one mi-
nute before a correct display can be seen. Moisten the electrodes slightly before wearing
the strap. This increases the contact sensibility and enables a better wireless signal trans-
mitting.
Hint: The battery compartment lid should face the outside when wearing the belt
Battery replacement:
Open the battery case cover on the back side of your transmitter and replace the old bat-
tery by a fitting new one (CR2032). Ensure correct polarity when inserting. Close the case
cover properly.
Remarks
1. If your skin is too dry, the chest belt may not be able to measure your pulse rate correctly.
Moisten your skin and the electrodes slightly and try again.
2. If your chest hair is too dense, the chest belt may not be able to measure your pulse rate
correctly. Please only use the belt if your chest hair is not too dense.