40
Built-in receiver
The computer is equipped with a built-in receiver, which can receive the pulse signals measured by a
compatible (uncoded / 5 kHz, e.g. Skandika chest belt) chest belt wirelessly.
So you can decide, if you want to measure your pulse frequency by the hand sensors or by the chest
belt. A chest belt would enable you to exercise without the need to grasp the hand sensors all the time.
Make sure, the correct battery is inserted into the chest belt if you want to use this feature.
You may adjust the strap to a comfortable length. However, the electrodes must have contact with
your skin in order to measure your heart rate correctly. It may last up to one minute before a correct
display can be seen.
Always pay attention to the instruction manual of the chest belt device.
In case you grip the hand sensors and wear a chest belt at the same time, the device will prefer the
signal from the hand sensors.
