Skandia Elevator KTG, Руководство по сборке

Страница: 3 / 28

SKANDIA ELEVATOR –KTG
Delivery information
Inspection of Goods
Check that the number of packages agrees with the delivery note and that
the packing and goods are not damaged. Make a note of any damage and
missing materials on the consignment note and report it to the carrier and
to us. Make sure the delivery is complete after unpacking the goods. Any
materials that are found to be incorrect must not be assembled.
Warranty
A 2-year factory warranty from the day of delivery applies to all models
of Skandia Elevator AB machinery. A condition of the warranty and any
subsequent compensation is that Skandia Elevator AB is contacted and an
agreement reached between the customer and Skandia Elevator AB on how
any faults should be rectified. The warranty covers all parts that are damaged
or break due to faulty design or manufacture. Faults and damage caused by
faulty assembly, incorrect use, or lack of maintenance will not be covered by
the warranty.
CE mark
A CE mark is located on the transmission side of the drive and is proof
that the machine has been manufactured in accordance with EU machine
directives and complies with safety requirements. The CE mark contains
information concerning year of manufacture, model designation, and order
number. Always specify the order number in the event of a claim and when
ordering spare parts.
EC Declaration
Skandia Elevator AB
Arentorp
S-53494 Vara
SWEDEN
declare under our sole responsibility that the product:
KTG
order number:
.............................................................................................................................................................................
to which this declaration relates is in conformity with Council Directive of
December 29, 2009, on the harmonization of the member States relating to
machinery, 2006/42/EC.
Unless otherwise specified on the CE mark, the product is manufactured
in accordance with EU Machinery Directive and is classified as Category III
3D/0D. It is intended for the transport of materials that correspond with ATEX
Zone 22, and the external environment is unclassified.
Vara 29/12 2009
Joakim Larsson, CEO