Skandia Elevator KTG, Руководство по сборке

Страница: 18 / 28

Attach the support leg (Y) at the same time as the bottom joints.
Note! Use only the upper and lower holes between the intermediate sections
and towards the drive.
1.
2.
Assemble the side joints.
Illustration A shows: Trench intake section and drive assembled directly to the
bend section.
Illustration B shows: Intermediate section assembled partly between trench
intake section and bend section, partly between bend section and drive.
Assemble the conveyor from the bend and outwards.
! IMPORTANT!
Make sure that machine parts are assembled in a straight line and are
not twisted.
Assemble the bottom joints.
!
IMPORTANT!
When assembling outdoors, the seams in the side plates, lid, and inlet
must be sealed with silicone.
18
SKANDIA ELEVATOR – KTG
Assembling the machine