11. Dual pulse frequency selec�on
The recommended control range is in accordance with the welding range.
12. Dual pulse cycle selec�on
It is recommended to use it in the range of 30%-40%.
Welding current selec�on
Turn the knob to adjust the welding current. The appropriate sheet thickness will appear on the right side.
The TIG method is especially recommended for aesthe�c and high-quality metal welding, without labour-intensive
machining a�erwards. However, this requires proper prepara�on and cleaning of the edges of both welded pieces.
Mechanical proper�es of the addi�onal material should be similar to those of the welded pieces. The shielding gas is
pure argon, supplied in the amount according to the welding current se�ngs.
TIG LIFT
MMA
16
EN
