Skan ErgoMeter, Руководство пользователя, Страница: 40 / 64

40
Assembly
Assembly:
For the assembly of this item we recommend to use the provided tools. Before starting to assemble
please check according to the part-list in this manual, if all parts are complete. Perhaps some
parts are already pre-assembled for your convenience.
For your safety in some cases lock nuts were used. Maybe it is a little difficult to screw them
tightly onto the respective screws, but they will not get loose easily (to ensure a safe connection).
If you should loose and fix those lock nuts several times, they will lose this lock mechanism.
In this case you should use new lock nuts of same size.
Step 1: Stabilizers
Attach the front stabilizer (J-7) & rear stabilizer (I-5) to the main frame (G-12) with each 4 screws M8
x 20 (N-3) and 2 washers (N-4).
Properly fix the stabilizers in order to avoid loosing them during exercise.
The height adjusters (I-3) are used for compensation of uneven floor if necessary. Adjust these parts
until the unit is standing firmly on the floor.
The front stabilizer is equipped with transportation rolls (J-3), which allow you to move the item
easily from one place to another after assembling (please pay attention to protect your floor against
scratches and/or abrasion before any transport action).