7
•
Using any kind of boiler water treatment (solution) can help decrease scale build-up.
•
DO NOT add detergent, wax or any cleaning additives in the water tank or steam vessel.
•
DO NOT use distilled water or filtered water below 15 ppm.
•
Connect to electrical power according to the product specifications. (See page 2,
“Product Specifications”)
•
The electric supply connection is to be made by a qualified electrician and comply with
IEC 60364-1.
•
Be cautious of the risk of electric shock in the event of connecting to electrical power.
•
Ensure the ground connection of Grounding Chain and Ground Wire attached on the
machine to prevent the risk of damage from Electro Static Discharge.
•
Users about to use the machine should carry out a visual check for insecure cable at
entry to a plug, evidence of poor wire connections or evidence of appliance or plug
overheating.
•
Make sure that all the switches on the machine are off before plug-in power cables.
•
In the event of using extension wire/extension cord, ensure that both ends of electric
wires are securely attached and properly insulated.
•
Make sure to use right extension cord depending on the electrical parameters and the
length of extension cord. (Contact manufacturer or local distributors)
•
Machines shall not be used by children. Children should be supervised to ensure that
they do not play with the machine.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children without supervision
•
WARNING Do not use the machine within range of persons unless they wear protective
clothing.
•
Noise can be reached to 95 decibel(dB) but subject to differ depending on steam
pressure.
•
DO NOT use the machine within the range of persons who are not wearing any protective
gear.
•
HOT SURFACE. DO NOT touch steam vessel, steam valves, steam hoses and guns in
operation.
•
Replace steam hoses immediately if ruptured.
•
Use manufacturer approved spare parts and accessories including steam hoses, steam
guns and power cables.
•
Unplug the machine from its power source and allow it to cool before carrying out any
maintenance.
•
NEVER disable sensors in order to bypass an alarm signal.
•
Open the drain valve and release all remaining water from the steam vessel after users
shut down the machine completely. (See page 15, “Shutdown Operation”)
•
NEVER spray steam over cleaning hazardous materials or surfaces containing hazardous
substance including asbestos.
