2.4G Datalink User Manual v1.1
14
2020 SIYI Technology Copyright
3.
Turn to the air unit, stick a pin or needle to the linking button inside the linking
hole, press and hold the button for 3 seconds till the status indicator blinks red
which means the receiver is ready for linking;
4.
If the transmitter indicator and the receiver both blink green, linking is finished.
WARNING
Before linking the transmitter to the receiver, please make sure your aircraft motors have no
power connected (E.S.C are off connection).
Reboot the receiver when linking steps are finished, and try to manipulate on the transmitter
to confirm if it works well.
