2.4G Datalink User Manual v1.1
13
2020 SIYI Technology Copyright
WARNING
Do not fold or cover antennas and avoid any obstruction between the transmitter and the
aircraft in flight, otherwise there will be an obvious decrease to transmission signal quality.
3.2 How to Link/Bind 2.4G Datalink Ground Unit to Air Unit
Each unit of 2.4G Datalink is assigned with a unique ID code. Before linking the
ground unit to the air unit, the receiver identifies the transmitter ID (
Linking/Binding
)
first. After the first linking process between the transmitter and the receiver is done,
the transmitter ID will be memorized in the receiver so that you don’t have to repeat
the process before the next flight/operation (except when your transmitter has to be
linked with a different receiver).
Linking/Binding Steps
1.
Please keep the ground unit one meter away from the air unit and power on
them;
2.
On the ground unit, stick a pin or needle to the linking button inside the linking
hole, press and hold the button for 3 seconds till the status indicator blinks red
which means the transmitter is ready for linking
