Now is a good time to try it out, before you assemble the enclosure….
move all the control pots to their fully clockwise position and also turn the
trim pot R45 fully clockwise. Connect an amp/speaker (start at low volume!)
and apply power. Tap the piezo… you should be hearing something…
If all seems good lets finish things off! Locate the four flange nuts and
remove the film from the acrylic side panels
Push the hexagonal parts of the flange nuts into the holes using pressure
from your thumb. Do not hammer them or use a vice etc as you will shatter
the acrylic!
Note that the laser cut holes for the nuts are very slightly tapered (due to
the shape of the laser beam) which means the nuts can be pushed in more
easily from one side of the panel than the other. Try to ensure the nuts are
inserted from the wider side of the hexagonal holes.
Содержание PCLONE2
Страница 24: ......
