Sixty Four Pixels PCLONE2, Инструкция по эксплуатации

Страница: 1 / 36

PCLONE2
– Analog Percussion Synthesizer
Welcome to the PCLONE2 build instructions!
I’ll assume you’ve done some soldering before and skip the basics,
however if you do need some tips or reminders on soldering technique,
please check out my page
here . As kits go, this is moderate in complexity.
You should give yourself at least 3-4 hours to make the kit and go slowly
and carefully
– it is much easier to avoid a mistake than fix it afterwards…
Here is an image of the main PCB layout which can be useful to refer to as
you work, especially if you accidentally put a component in the wrong
place, covering up the designator (Click
here for a bigger version)