background image

3

1  Security requirements

1.1  Electromagnetic compatibility

When connecting additional or other compo-
nents the “Electromagnetic Compatibility Direc-
tive” (EMC) must be adhered to.

Hearing aids

Under certain circumstances, terminals can 
cause some hearing aids to malfunction. Con-
tact the dealer/manufacturer of your hearing aid.

Other medical equipment

If you use a medical device, please contact the 
manufacturer  to  determine  whether  it  is  suffi-
ciently protected against electromagnetic 
waves. If necessary, your attending physician 
could be helpful in obtaining this information. 
Equipment is often used in hospitals, medical 
offices and other facilities which is highly sensi-
tive to external electromagnetic waves. Do not 
use the terminal in such locations.

Aeroplanes

To avoid interfering with the communication 
systems, do not use the terminal during the 
flight. Only activate the terminal on the ground 
with permission from the ground personnel.

Potentially explosive areas

Do  not  use  the  terminal  in  explosive  zones  or 
 areas bearing signs with “Switch off sending/ 
receiving devices”. Do not use the terminal in 
such potentially explosive locations.

Appropriately marked locations

Follow instructions and do not use the terminal 
in locations with obvious signs and instructions 
prohibiting such use.

While driving 

Radio frequencies can interfere with electronic 
systems in vehicles, such as car radios or secu-
rity devices, etc. 

Vehicles equipped with airbags

An enormous force is released when airbags are 
activated. Therefore, do not place the terminal in 
the area above the airbag or in the space in which 
the airbag could deploy. Terminals that are 
improperly installed can cause serious injury 
upon deployment of an airbag.

Electronic devices

Most morn electronic devices, such as those 
used in hospitals and vehicles, are protected 
against radio frequencies. However, this is not 
the case with all electronic devices. Do not use 
your terminal in the proximity of medical equip-
ment without obtaining prior permission.

Heart pacemaker/other medical devices

Terminals can affect the functioning of implanted 
heart pacemakers and other medically implanted 
devices. Patients with a heart pacemaker should 
be informed that the use of terminals in the 
immediate vicinity of a pacemaker can lead to 
malfunctions. Do not pass the terminal over the 
pacemaker. The risk of a malfunction however, is 
minor if a minimum distance of 15 cm between 
the terminal and the pacemaker is maintained. If 
you suspect that malfunctions are occurring, put 
the terminal aside. If necessary, consult your car-
diologist. If other medical devices are used in or 
on the body, then the equipment manufacturer 
should be consulted as to whether such devices 
are sufficiently protected against radio frequency 
signals. Do not use the terminal where the devices 
are implanted.

1.2  Where wireless technologies are used

Содержание xenta COMPACT
































Отзывы: