Siva chaser f183, Инструкция по эксплуатации

Страница: 17 / 27

17
Quadrocopter assembling
1. Prepare screw driver, bracket and protect cover.
2. Insert the two sets brackets into the bracket holes at the bottom of the
quadrocopter (as picture shown), and then lock the four screws tightly.
3. Insert four protection covers into the holes of the protection cover, which
beside the four blades, and use the screw knife to lock four screws tightly.
Recharge the quadrocopter battery
Insert the factory equipped charger plug into the power, the recharger indicator is green,
then connect the product battery, the indicator will turn to red, it indicate the battery is
under recharging, when the indicator turns to green again under the recharge status,
that means recharge finish and the battery is full. Whole recharge time will be around 90
minutes press 3D mode key, the transmitter indicator turns on, fly the quadrocopter to 2
meters high and press the right control stick to any direction quickly to its bottom and
release it, the quadrocopter will roll to the direction corresponding to the r ight control
stick, if need to quit then press key again.
In case that the quadrocpter might descend on a further or insecure zone due to the
insufficient battery power when flying outsides, the quadrocopter is specially designed
with the function of secure warning. When the battery power is insufficient, the Led
light would turn from constant lighten to flashing. Then player may have time to take
back the quadrocopter and change the battery or recharge for the next flight.