sitrex TR/11, Сборка, использование и обслуживание

Страница: 20 / 40

19
Step 10
Step 10
Before attaching the wheel assembly 2, brush pin A and pin 6 with grease.
Insert nylon bushings 4 in the seats in arm 1. Place the shim 3 over the pin of the
wheel assembly 2.
Insert the preassembled wheel assembly 2 into the seat in arm 1.
Attach the connecting rod 5 to the pin on wheel assembly 2 using the spring pin 6.
Attach the grease nipple 7 to the seat in arm 1.
Check to make sure that the wheel assembly 2 turns freely in the seat in arm 1.
In this step use the following parts:
Position 3: 1 shim ø50-76x5 (1.97”x3”)
Position 4: 2 nylon bushings ø50-60x50 (1.97”-2.36”x1.97”)
Position 6: 1 spring pin ø10x80 (0.4”x3.15”)
Position 7: 1 grease nipple M8
Note:
At this point, for reasons of space, it is recommended that you proceed by
mounting the rake wheels.