background image

 

15 

 

STORAGE 

TIME 

RECOMMENDED  SERVICE  PROCEDURE  TO  PREVENT 
HARD STARTING 

Less than 1 month 

No preparation required 

1 to 2 months 

Fill with fresh gasoline and add gasoline conditioner. 

2 months to 1 year  Fill with fresh gasoline and add gasoline conditioner. 

Drain the carburetor float bowl. 

Drain the fuel sediment cup. 

1 year or more 

Fill with fresh gasoline and add gasoline conditioner. 

Drain the carburetor float bowl. 

Drain the fuel sediment cup. 

Remove the spark plug. Put a tablespoon of engine oil into the cylinder. 

Turn  the  engine  slowly  with  the  recoil  starter  to  distribute  the  oil. 

Reinstall the spark plug. 

Change the engine oil. 

After  removal  from  storage,  drain  the  stored gasoline  into  a  suitable  container, 

and fill with fresh gasoline before starting. 

Use gasoline conditioners that are formulated to extend storage life. 

Contact your authorized Dexin generator dealer for conditioner recommendations. 

     

               

1.Drain the carburetor by loosening the drain 

 

screw. Drain the gasoline into a suitable       
container. 

WARNING: 

 

Gasoline is extremely flammable and is     

                explosive under certain conditions. Perform 

  thistask in awell-ventilated area with the engine 
  stopped. 

  Do not smoke or allow flames or sparks in the 
  area during this procedure. 
2. Change the engine oil.   
 
3. Remove the spark plug, and pour about   
a tablespoon of clean engine oil into the cylinder.   
Turn the engine several revolutions slowly with 

                  the recoil starter to distribute the oil, then   

reinstall the spark plug. 
 
4.Slowly pull the starter grip until resistance is felt.   
At this point, the piston is coming up on its   
compression stroke and both the intake and exhaust 
valves are closed. Storing the enginein this position       
will help to protect it from internal corrosion. 

Содержание SPG8000



















Отзывы: