WLX-2100 | User Manual
28
•
Click Accept to save the settings or Cancel to discard the changes.
Configuring Static IP
Setting a static IP address allows an administrator to set a specific IP address for the range extender.
Options:
Account Name
•
Enter the account name provided by your Internet Service Provider (ISP).
Domain Name
•
Enter the domain name provided by your Internet Service Provider (ISP).
MTU
•
The maximum transmission unit (MTU) specifies the largest packet size permitted for an internet
transmission. The factory default MTU size for static IP is 1500. The MTU size can be set between
512 and 1500.
IP Address
•
Enter the range extender’s WAN IP address.
Subnet Mask
•
Enter the range extender’s WAN subnet mask.
Default Gateway
•
Enter the WAN gateway address.
Primary DNS
•
Enter the primary DNS server address.
Secondary DNS
•
Enter the secondary DNS server address.
Discard Ping on WAN
•
Keep it checked to recognize pings on the WLX-2100 WAN interface
•
Disable to block pings on the WLX-2100 WAN interface
Tip: Pinging IP addresses is a common method used by hackers to test whether the IP address is
valid. Blocking pings provides some extra security from hackers.
•
Click Accept to save the settings or Cancel to discard the changes.
