5.5. Folder names
The Mobile Data Copier copies the data on the target device. It automatically creates a
folder named ‘sync001’. If the ‘sync001’ folder already exists on the target device it will
automatically create additional folders named ‘sync002’, ‘sync003’, ‘sync004’, etc.
This ensures that each operation will not overwrite the existing data and files.
5.6 Error Messages
There are 3 possible warning messages:
- Source Disk Error : Check the source device
- Target Disk Error : Check the target device
- Target Disk Full
: The target device is full, remove data from the target
: device before continuing.
5.7 System Information
The ‘System’ option in the main menu shows the current firmware version.
5.8 Power Off
•
To turn off the Mobile Data Copier press the ‘Power/Command’ button for two
seconds.
•
When turned on and not used the Mobile Data Copier will automatically turn off
after 60 seconds.
6. Installing the Cardreader
The Mobile Data Copier can also be used as a memory card reader when connected to a
computer via the supplied USB cable.
6.1 Windows XP, 2000 SP3 & ME
Please update
Windows 2000
to Servicepack 3 or higher before continuing
installation. Servicepacks can be downloaded free of charge from Microsoft
www.digitalworld.ro Tel. 021-411.06.75, 0722.206.683
Di
git
al
W
ORLD
