•
Remove the cover on the bottom of the Mobile Data Copier and insert three AAA
batteries. With fully charged batteries the MD-011 can be used actively for 5
hours.
•
Press the ‘Power/Command’ button for 2 seconds to turn the Mobile Data Copier
on. The ‘Main Menu’ will appear.
•
The ‘No Disk’ message will be shown when no device is connected.
•
The ‘USB’ and ‘SM/CF/MS/SD’ icons will display if a USB device or a memory card
is connected.
Icon 1 = USB Storage I
Icon 2 = Memory Card I (
CF I/II & Micro Drive
)
Icon 3 = Memory Card II (
SM, SD, MMC, MS, MSPRO, MSDUO
)
Icon 4 = USB Storage II
•
Press the ‘Up/Down’ buttons to select which device to access. When the device is
highlighted press the ‘Enter’ button to display the content of the device.
5.2 Copy All Data
If you want to copy all data from the source device to the target device you use the
‘Copy All’ command.
•
Select the source device.
•
Press the ‘Command’ button to open the ‘Command’ menu.
•
Select ‘Copy All’ to copy all data from the selected device. Press ‘Enter’ to
continue.
www.digitalworld.ro Tel. 021-411.06.75, 0722.206.683
Di
git
al
W
ORLD
