2.2 Hardware and Software installation
Hardware Installation
Connect the USB-cable to the USB-Modem.
Please connect the ADSL line to the RJ11 jack of the USB ADSL modem and
the other end to the wall-outlet.
Do not connect the USB-Modem to your computer yet, wait until the
software asks you to.
Note
：
：
：
：
Before you start installing this device, you have to check with your ISP what
kind of service (connection method) is used such as; PPPoE, PPPoA, RFC
2684 bridged or routed, IpoA.
This information can be found in the ISP-List Addendum.
If your ISP uses PPPoE or PPPoA, please select “Wan PPPoE” or “Wan
PPPoA” to install the correct driver. If your ISP uses RFC 2684 Bridged or
Routed over IPoA please select “LAN” to install the correct driver.
If your ISP uses PPPoA VC-Mux then during the configuration of the modem
you will have to select: RFC2364 PPPoATM Null Encapsulation.
