Sit 190 Series, Инструкции по использованию и установке

Страница: 6 / 28

INSTallaTION
When Installing This Product...
1. Read these Instructions carefully. Failure to the comply with the instructions may result in
damage to the product or cause a hazardous condition resulting in injury.
2. Check the ratings given in the instructions and on the product to make sure the product is
suitable for your application.
3. Make sure the installer is a trained and experienced service technician.
4. After completing the installation, use these instructions to verify the product operation.
English
WaRNING
OXYGEN DEPlETION HazaRD. CaN CauSE INjuRY OR DEaTH DuE
TO aSPHYXIaTION.
1. uSE THIS PIlOT BuRNER ON vENTED aPPlIaNCES ONlY.
2. uSE a PIlOT BuRNER DESIGNED FOR uNvENTED GaS valvE
mODElS ON uNvENTED aPPlIaNCES. SEE THE maNuFaCTuRER
INSTRuCTIONS.
WaRNING
FIRE OR EXPlOSION HazaRD. CaN CauSE PROPERTY DamaGE,
SEvERE INjuRY OR DEaTH.
Follow these warnings exactly
1. Disconnect power supply before wiring to prevent electrical shock or equipment damage.
2. To avoid a dangerous accumulation of gas, turn off gas supply at the appliance supply valve
before starting the installation procedure and perform the Gas Leak Test after the completion of
the Installation.
3. Do not bend pilot tubing at the gas valve or pilot burner after the compression nut is tightened.
Gas leakage at the connection may result.
Follow the appliance manufacturer instructions if available; otherwise, use the instructions provided
below.
location
1. Locate the pilot burner for easy access and observation. If needed, replace the pilot burner with
an identical unit and place the new burner in the same position and orientation as the original
pilot burner.
2. Mount the pilot burner on the main burner. Mounting surfaces other than the main burner can
shift, bend or warp as the appliance expands and contracts while operating. See Fig. 2.
3. Mount the pilot burner so that the ignition flame remains properly positioned with respect to the
main burner flame. See Fig. 3