Sistemes Electronics Progres AGRONIC diesel, Инструкция по эксплуатации

Страница: 13 / 14

13
7.6. MANUAL SECTORS (AS)
This option has just got one section, AS. The
screen displays a number which corresponds to the
sector number which has to be used. Use the “+” and
“-“ keys to modify it. Press the “C” key to activate the
sector if it is stopped and vice versa.
If the programmer is at conditional stop, sectors
can be neither activated nor deactivated manually.
Also, if a sector activation which is not valid is done (at
fertilisation, activation of sector number 2 without
number 1 being activated, for example), it is not taken
into account.
A spot at the left of the sector number indicates
that this sector is already working.
A spot appears at the left of the displayed time at
the consultation codes C2 and C3, to indicate that the
programme has been activated manually. The
displayed time will be 00:00, making it different from a
manual programme. Press the “C” and “+” keys at
the same time to go back to the main menu.
If the engine is started by the activation of input
1, the first sector will appear as activated (as this is
so), but it can not be deactivated manually while input
1 is activated.
7.7. FERTILISATION TIME
This section is only to be taken into account if the
unit uses irrigation with fertiliser.
Post-irrigation is the time there must not be
fertilisation before the end of the irrigation, in order to
clean the pipes (Configuration - code 1-).
The fertilisation will be started when the
fertilisation time plus the post-irrigation to finish the
irrigation is left. If the addition of both times is superior
to the irrigation time, fertiliser will be injected during
the whole irrigation.
7.8. STOP
Press the “C” and “-” keys at the same time for a
sudden stop of the engine, stopping any activity which
is taking place. A blinking STOP message will be
displayed on the screen. The unit is to be activated
manually.
In this way, the programmer only allows
consultations and change of parameters and
programmes, but any engine start order is not taken
into account. The screen also keeps blinking to
indicate the STOP state.
Press the “C” and “-” keys at the same time to go
back to the automatic working of the unit. The screen
stops blinking and the start orders are taken into
account again.
7.9. PROGRAMME PATTERN
PROGRAMME 1
How often it activates
Starting time
Time 1
Time 2
First activation date
PROGRAMME 2
How often it activates
Starting time
Time 1
Time 2
First activation date
PROGRAMME 3
How often it activates
Starting time
Time 1
Time 2
First activation date
PROGRAMME 4
How often it activates
Starting time
Time 1
Time 2
First activation date
PROGRAMME 5
How often it activates
Starting time
Time 1
Time 2
First activation date