Sistemes Electrònics Progrés s.a. 06750001, Руководство пользователя

Страница: 4 / 8

4
· User manual | H2O Transmitter
Consult the manual of each sensor for detailed information about its installation and
connection.
H2O Transmitter
Watertight
connection
terminals
Sensor
To guarantee the water-tightness of the
connections of the wires in the module hose,
using watertight terminals is recommended.
The connection through these terminals must
be made without stripping the cable wires.
The 3M Scotchlok series (www.3m.com);
ES Caps from TYCO Electronics (www.
tycoelectronics.com); or Cellpack resin splice
and derivation kits (www.cellpackiberica.
com) can be used as connection elements.
6-wire power supply and current output connection hose:
Power supply and current output
Wire colour ID Function 1 sensor 2 sensors 3 sensors
White 0V - (negative) of power supply x x x
Brown 12V + (positive) of power supply x x x
Green S1 Output 1: 4 - 20 mA x x x
Yellow S2 Output 2: 4 - 20 mA x x
Grey S3 Output 3: 4 - 20 mA x
Sensor connection hose, 6-wire (2 sensors) or 9-wire (3 sensors):
Sensor connection
Wire colour ID Function 1 sensor 2 sensors 3 sensors
White A1 Analogue sensor input 1 x x x
Brown 0V Common sensor power supply x x x
Green VA1 Sensor 1 power supply x x x
Yellow A2 Analogue sensor input 2 x x
Grey 0V Common sensor power supply x x
Pink VA2 Sensor 2 power supply x x
Blue A3 Analogue sensor input 3 x
Red 0V Common sensor power supply x
Black VA3 Sensor 3 power supply x
It is recommended that loose cables also be connected with an excess of 3M of
connector to avoid possible short circuits or from them getting wet.
NOTE