User manual | H2O Transmitter
·
5
Configuration
The transmitters are generally configured at the factory. However,
it is possible to make consultations or configurations through the
use of a “Module Reader,” consisting of a screen and four keys that
are connected to the transmitter through the only interior visible
connector.
Press the key to enter the main menu.
With the + and keys, you can change the options within
the menu. With the key, you can enter the selected menu
option.
With the key, you can return to the menu option of the
previous hierarchy.
Within the main menu, you can see the following options:
• Consultation
• Configuration
+
-
c c
Transmitter’s general consultation menu, where you can view:
• Controller firmware version No.
• Transmitter type (depending on the sensor used).
• Consultation of the value, in mV, that the sensors deliver, (from input 1 (A1) to input 3 (A3)).
• Consultation of the 4-20 mA current value being delivered (output of 1 to 3).
CONSULTATION MENU
Configuration menu of the different transmit-
ters according to the type of sensor.
For each sensor, you can configure the number
of sensors that are read and the type of soil.
• No. Inputs: 1, 2, or 3
• Soil: Mineral or Potting Soil
CONFIGURATION MENU
Soil selection table according to sensor
Sensor
Mineral
soil
Potting
soil
10HS Decagon
x
x
PHYTOS-31 Meter Group
x
EC-5 Decagon
x
x
TEROS-10 Meter Group x
x
