Sisis 8432 29 10, Инструкция по эксплуатации

Страница: 2 / 30

2
CERTIFICATE OF CONFORMITY
Auto-Rotorake CN Code: 8432 29 10
Manufacturer:-
Howardson Ltd, Howardson Works, Kirk Langley, Derby, DE6 4NJ. UK
Owner of Technical Document:- Mr I.D. Howard, Howardson Ltd, Howardson Works Kirk Langley, Derby, DE6 4NJ, UK
I the under signed Declare that these machines:-
The reliability and quality of performance of the SISIS Auto-rotorake depends upon some simple care maintenance
carried out regularly. This manual has been prepared to allow the user to carry out all such work.
It is advisable to read the instructions carefully. Proper care and attention will enable the machine to give a continuous,
satisfactory, and reliable service. Failure to carry out regular lubrication and maintenance as outlined in this manual may
render any guarantee or warranty invalid.
In the case of any difficulty, or if further information or advice is required, our Service Department is always at your call. In
the interests of speed and accuracy of information please quote the serial numbers of the machine and engine when
making enquiries.
For the machine, this is to be found on a plate attached to the side frame. The engine number is stamped
on either the crank case or the gear casing facing towards the front of the machine. We suggest you write
the numbers on the front page of this book.
INTRODUCTION
SERIAL NUMBERS
Ian Howard
Tested at:- Howardson Works test site September 2011
Complies with the applicable requirements of:-
- Machine Directive
2006/42/EC
- Noise Directive 2000/14/EC (Annex VI Procedure 1)
Managing Director
MODEL OPERATING
WIDTH
POWER
(HONDA)
MEASURED SOUND
POWER LEVEL
GUARANTEED SOUND
POWER LEVEL
SERIAL
NUMBER
ARR/5 20” (510MM) GX160 79dB Lwa 98dB Lwa See Product ID
range
ENGINE SERIAL NUMBER
MACHINE SERIAL NUMBER
NOTE:- MAKE A NOTE OF THE SERIAL NUMBERS OF YOUR MACHINE & ENGINE AND ALWAYS
QUOTE THEM IN ANY COMMUNICATION WITH PERSONNEL AT DENNIS.
SP20008_REV3 MAY 2018