Sisis 8432 29 10, Инструкция по эксплуатации

Страница: 5 / 30

CAUTION
PLEASE READ THESE OPERATING INSTRUCTIONS CAREFULLY BEFORE
COMMENCING WORK.
We want you to obtain the best performance from this machine. If you have any difficulty in carrying out the following
instructions please contact SISIS direct or your local SISIS Territory Manager or SISIS Dealer.
OPERATING PRINCIPAL
Power from the engine is transmitted through a vee belt clutch mechanism. One belt powers the tine reel through a
cross shaft with a final chain drive. Forward travel power is supplied through a cross shaft, spur gearing and a
differential gearbox, to the ground wheels. The depth of cut is simple to alter with the micro-adjuster on the handle
connecting through to the front roller frame.
CONTROLS
CAUTION
DISENGAGE THE REEL CLUTCH BEFORE STARTING THE ENGINE. RAISE THE TINE
REEL CLEAR OF THE GROUND TO PREVENT CONTACT.
5
IMPORTANT SAFETY INSTRUCTIONS
A = Engine Cut-out Lever
B = Engine Run / Stop Key
C = Drive Lever
D = Throttle
E = Cut Depth Micro Adjuster
F = Tine Drive Lever
The blades must be CLEAR of the ground before adjustment
commences. The depth of cut is adjusted by varying the height
of the front rollers, using the micro adjuster. Start the engine
and allow to warm up. Engage the ground wheel and reel drives
and lower the reel using the micro adjuster until the required
amount of thatch is being removed. Always disengage the reel
drive when the machine is stationary on the green.
A
C
D
B
F
E
SP20008_REV3 MAY 2018