16
Important: NEVER WASH OR STERILIZE the Intelligent Pump(C). You can wipe it using a soft cloth.
4. SUGGESTION
1. Use steam sterilizer for sterilize. Not recommended boiling. Firstly, the product is easy to
damage If improper sterilization. Secondly, this unscientific method of sterilization can not
achieve the complete effect. If use boiling, note that be more water in pot, float the product,
people do not leave. Not too long.
2. For the lactating mothers, breast relatively high frequency (typically 2-3 hours once), not
suggest clean and sterilize each use. Excessive disinfection and cleaning accessories could
easily lead to premature aging, reduce the life of a breast pump. Thoroughly clean the stain
and steam sterilized once a day is recommended
Important! if the breast pump Is for the purpose of storage, be sure to disinfect ail breast
pump parts, otherwise, milk easy to go bad, difficult to store.
5. CHARGING INTELLIGENT PUMP
Intelligent pump parts must be charged before use, when charging the red light. Light is off,
that is fully charged, ready to use. One charge a battery can be use over 2.5 hours.
6. ASSEMBLE YOUR PUMP
1. With clean hands, insert the Breast shield (Silicone Massage Pad)(a) into the Shield Brace(b)
(P1).
2. Insert the silicone piston(h) Into the pump body(d) (P3) Twist the Shield Brace(b) onto the
pump body(d) rotating clockwise gently until securely in place. (P4).
3. Place the Valve(e) into the pump body(d), making sure it fits securely around the edge. (P5)
(Important, If the valve is lost or not properly Installed, will not be able to use a breast pump).
4. Insert the feeding bottle(f) into the pump body(d), rotating it clockwise gently so that it
sits securely with the pump body thread. (P6).
5. Insert the Intelligent Pump(C) Into the pump body(d), In place, breast pump can use. (P7-P9).
To make the breast pump place more firmly, insert the feeding bottle into the base. (P10).
manual SBCA20 PL NL EN.indd 16
07/03/2016 22:08
