Sirus Live M416, Руководство пользователя, Страница: 21 / 45

21 / 45
9.1.10. MUTE
When pressed, the channel signal is turned off. This affects the feed to LR mix; pre and post fade aux
sends and direct output, but does not affect the insert send. The red indicator lights when the channel
is muted. Always mute the channel when switching phantom power or plugging the cables and
sources.
9.1.11. PFL
Press PFL to listen to the pre-fade channel signal in the headphones and local monitor without
affecting the main outputs. The console PFL/AFL active red indicator lights and the monitor LR meters
display the channel signal. The PFL switch yellow indicator lights to show that PFL has been selected
on that channel. Selecting more than one PFL, at the same time mixes those signals together in the
monitor.
9.1.12. Meter
A 4 LED channel meter displays the pre-fader signal level. 'SIG' lights when a signal of -12dBu/0.2V is
detected. ‘0’ lights when the nominal 0dBu level is reached, and ‘+6’ at +6dBu/1.5V. ‘PK’ lights when
the channels pre-fade signal within 5dB clipping. This gives you enough warning to reduce gain before
you hear signal distortion.
9.1.13. Routing
Press L-R to route the channel signal to the main LR mix. Press 1-2 or 3-4- to route to the groups. Use
Pan to position the signal between L/R and the odd/even group pairs. To route to a single group set
Pan fully to one side. You can route to L-R and all groups simultaneously by pressing all switches.
Check that you have the switches correctly before you start mixing.
9.1.14. Fader
A high quality 100mm smooth travel fader with protective dust cover controls the channel level feeding
the main LR mix, groups and post-fade aux sends. The fader pr10dB maximum boost above
its normal unity gain 0dB position.