Sirus Live M416, Руководство пользователя, Страница: 19 / 45

19 / 45
9. Input channel
9.1. Mono
9.1.1. +48V
Sw48VDC to the channel input XLR to powering microphones or DI
boxes that need phantom power. The power is current limited through 6k
Ω
resistors to pins 2 and 3.
Warning: Do not connect unbalanced sources or cables to inputs with
phantom power selected. To avoid loud clicks always mute the channel
before swi48V on or off and when plugging or unplugging
microphones.
9.1.2. Polarity
Reverses the polarity (+ and – connections) of the input source. Useful when you
are using the above/below mic technique, for example when take a snare drum
with two microphones, or for correcting mic placement and cable wiring errors.
9.1.3. Line (PAD)
Press the switch to select the channel TRS jack line input. Release the switch to
select the XLR Mic input. The XLR is normal through the TRS socket. With
nothing plugged into the line input the switch therefore becomes a Pad for the
Mic XLR. It attenuates the input signal by 20dB for connection to high level
microphone or line sources. This gives the mic preamp a massive 74dB range
and headroom of +34dB to deal with the hottest signals.
9.1.4. Gain
Adjusts the input sensitivity to match the connected source to the internal
0dBu/0,77V operating level of the channel. Provides a variable 54dB range from
+dB to +60dB gain (mic), or -14dB to 40dB (line, padded mic). The gain should
be set so that the channel meters average ‘0’ with the loudest moments lighting
‘+6’. Reduce gain if the red peak indicator lights.
Important note on setting channel levels:
Use PFL to set the gain controls before correct signal level through each
channel. The main LR meters provide a high resolution display of the channel
signal level. Use the faders to balance each signal in the mix. To ensure optimum