6 / 10
9. SCRATCH MODE
When the (10) is illuminated the wheel is in SCRATCH mode, you may press the SCRATCH
button to exit SCRATCH mode
10. When you enter the JOG work mode the lamp lights up.
11. FOLDER/TRACK SEARCH
Allows you to navigate through folders or tracks similarly in either USB or CD mode. When
navigating through a standard CD, turn the rotary to the right to advance the selection or turn
the rotary to the left to decrease the selection.
12. When you enter the SD work mode the lamp lights up.
13. When you enter the USB work mode the lamp lights up.
14. USB PORT
Enables connecting any USB memory stick.
15. 3-IN-1 CARD SLOT
Slot for inserting a 3-IN-1 card. The contacts of the card must point downwards. The unit
cannot read cards with a capacity of more than 4 GB. The unit is not compatible to SDHC
cards and only supports the MP3 format.
16. USB/SD
Select the audio source between USB storage and SD card.
17. PITCH BUTTON
Pitch on/off switch. The adjustment of the pitch potentiometer is available when pitch state is
on and the light is illuminated.
18. INPUT TOGGLE SWITCH
Selects which source will be live to that channel based on what you have connected to the
rear panel input section. In USB 1 or SD 1 position the internal USB 1 or SD 1 units are active.
19. CUE FOR CH1-2
Selects which source will be live to that channel for CH1 & CH2.
20. INPUT TOGGLE SWITCH
Selects which source will be live to that channel based on what you have connected to the
rear panel input section. In USB 2 or SD 2 position the internal USB 2 or SD2 units are active.
21. DISPLAY
LCD Display indicates the Track/Numbers/Time/Remain/Pitch/Continue/Single.
22. IN BUTTON (LOOP SYSTEM)
This button sets the beginning point of the loop and the light is illuminated.
23. OUT BUTTON (LOOP BUTTON)
When you press this button, you set the end point of the seamless loop and you start the loop.
To finish the loop, press this button again.
24. RELOOP BUTTON (LOOP SYSTEM)
This button is used to start the last saved loop. To finish the loop, press this button again.
25. DSP/REVERSE
Push the reverse button to play your track in reverse, push the reverse button again to cancel
this feature.
