9 / 10
44. HEADPHONE JACKS
This is used to connect headphones for audio monitoring.
45. DJ MIC
For plugging in a XLR type microphone.
5. Connection
46. AC CORD
Use this cable to connect the AC mains power to the unit
47. POWER BUTTON
Press the power switch to turn on the unit. To switch the POWER off, press the POWER
switch again.
48. STEREO MAIN OUTPUT
Unbalanced RCA connectors are controlled by the master fader.
49. INPUT
Plug in a line level device such as tape deck or additional CD player here
50. LINE/PHONO INPUT SWITCH
Use this to allow either line level or phono level equipment to be plugged into your channel
inputs. When phono input is selected, your signal is fed directly to the high-quality RIAA phono
preamplifiers. Line level sources will overload the sensitive phono pre-amps and will sound
very bad, so always be sure to toggle the line / phono switch over to line before connecting
line sources.
51. GND
Grounding plug for turntable connection. Always use this connection when using turntables.
Your turntable cable should have a grounding wire.
