Siruba C007K, Руководство пользователя

Страница: 47 / 59

15
6. General Parameter Table :
Mode
Parameter
Code
Parameter Function
Range /
Selection
Description / Note
001. H Maximum sewing speed ( spm ) 50
～
9999 Maximum speed adjustments.
004. N
Start Back-Tacking speed or
Constant-Stitch speed for the
Interlock Stitch machine ( spm )
50
～
8000
Speed adjustment for Start Back-Tacking or Constant-Stitch
sewing in the Interlock Stitch machine.
005. V
End Back-Tacking speed ( spm )
50
～
8000
Speed adjustment for End Back-Tacking.
006. B
Bar-Tacking speed ( spm )
50
～
8000
Speed adjustment for Bar-Tacking.
007. S
Slow Start speed ( spm )
50
～
2000
Speed adjustment for Slow Start.
008. S L S Number of Stitches for the Slow Start 0
～
99 Number of Stitches setting for Slow Start.
009. A
Automatic Constant-Stitch sewing
speed or Auto-start testing speed
( spm )
50
～
8000
Speed adjustment for Automatic Constant-Stitch sewing.
Note ： Valid only when the 【 037. SMP 】 set on 『 A 』
010. A C D
Automatic End Back-Tacking sewing
(Can invalidate the Stitch Correction function)
ON / OFF
O N
：
After last seam of Constant-Stitch sewing, it will automatic
execute the End Back-Tacking sewing function.
Note
：
When turned on, the Stitch-Correction is invalid.
OFF ： Automatic End Back-Tacking will not execute after last seam,
but can be done by pedal manually
Note
：
The Stitch-Correction is valid in Free sewing, but the
parameter
【
011.RVM
】
must set on
『
B
』
.
011. RVM
Back-Tacking Mode selection
J / B
J ： JUKI mode ( Press TB switch will activate the reverse solenoid
when either machine is stopped or running).
B
：
BROTHER mode (Press TB switch will activate the reverse
solenoid only when machine is running).
040. W O N Wiper function selection ON / OFF
O N
：
Wiper valid.
OFF
：
Wiper invalid.
041. T M
Trimmer function selection ON / OFF
O N
：
Trimmer valid.
OFF
：
Trimmer invalid.
045. S P Sewing speed 0~8000 Showing the current sewing speed.
A
046. D I R
Direction of motor rotation CW / CCW
C W
：
Clockwise.
CCW
：
Counterclockwise.
060. L
Low speed ( spm )
50
～
500 Speed adjustment for Low speed.
061. T
Trimmer speed ( spm )
50
～
500 Speed adjustment for Trimmer.
064. F O
Full-On time setting for Automatic
Foot Lifter ( ms )
0
～
990 Timing adjustment for Full-On time of Automatic Foot Lifter actives.
065. F C
Duty-Cycle setting for Automatic
Foot Lifter ( ％ )
10
～
90
Adjustment for Duty-Cycle of AFL.
(Fine tuning can reduce the over heating)
066. F D Running-Delay time setting (ms ) 0
～
990 Running-Delay time adjustment for the Automatic Foot Lifter.
070. H H C
Cancel Automatic Foot Lifting when
Half-Heeling the pedal
ON / OFF
O N ： Pedal half heeling without foot lifting function.
(Only full heeling can activate Foot Lifer.)
OFF
：
Pedal half heeling with foot lifting function.
075. S F M
Safety switch mode NC / NO
NO ： Means Normal Opened.
NC
：
Means Normal Closed.
083. T 2
Trimming timing (ms)
0 ～ 990
Adjustment for trimming timing
087. L 2
Tension release timing (ms)
0
～
1500
Adjustment for tension release timing.
093. W 2 Wiper timing (ms) 0
～
9990 Adjustment for wiper timing.
119. DD
Motor drive mode ON / OFF
O N ： Motor drive machine head directly
OFF
：
Motor drive machine head with belt.
B
121. A N U
Needle goes up automatically as
power turned on
ON / OFF
O N ： Power turned on, needle goes up position automatically.
OFF
：
No Use.
122. HL
Upper limit of maximum speed 50 - 9999 The motor's maximum speed setting.