Siruba C007K, Руководство пользователя

Страница: 45 / 59

- 13 -
(4).Key functions in the Parameter
【
Mode A and B
】 ：
(Example as the following)
(5).How to access the
【
Mode Value
】
and adjust the setting
Step 1
：
Confirm the parameter code you want to make adjust.
(See the parameter table for the detail)
Step 2
：
Follow the instruction to access parameter area and call out the parameter code make range.
Speed, timing and angle setting can be set as the following
：
Step 3
：
Start making adjust parameter value. (Function selection use key and to
【
001. H
】
value setting for your reference)
A). How to increase the default value
：
Example Factory default setting
【
H.4500
】
increase to
【
H.5000
】
. (See chapter 5, section (4) or (5)
to learn how to access a
、
b
、
c value setting, then do the following step by step.)
P S
STOP
STOP
d. Into
【
H.4500
】
value area
e. Press just 1000
th
and 100
th
digit
f. After it shown at 5000
P S
STOP
P S
STOP
P S
STOP
g. Into
【
H.4500
】
value area
h. Press just 1000
th
and 100
th
digit
P S
STOP
P S
STOP
In
【
Mode A
】
First parameter showing is
【
001. H
】
All available parameter start 1~46.
In
【
Mode B
】
First parameter showing is
【
047.MAC
】
All available parameter start 1~122.
7-segment
display
.
Parameter
increment key
Same as parameter
increment key
Parameter
decrement key
Enter Value area
No function
7-segment
display
No function
.
.
.
(Note: Use key to adjust
value to 5, and key to 0)
.