Siruba C007K, Руководство пользователя

Страница: 35 / 59

3
2. Installation and Adjustment:
(1). Motor installation:
A). When motor and machine installed together, refer to the machine head’s instruction.
B). When motor installed under the working table, drill holes in the table as the following diagram for
the installation.
C).M5 interlock mode motor installation:
1. Takes off the heat exhaust fan and pulley of sewing machine.
2. Puts coupling
○
A into shaft of sewing machine
，
heat exhaust fan closes to shaft.
3. Fix the set screw
○
B of coupling. Warning
：
Clamp sets crew of coupling must fix in flat surface
of shaft or carve
○
C .
4. Fix the fan cover
○
D of motor.
5. Fix M 5 motor on fan cover
○
E .Warning
：
There is against dull design for coupling of sewing and
motor , joint direction must pay more attention on it.
6. Fix fan cover of motor
○
F .
For USA Base
57
216
Oil tank
66
105
Drill 9 mm
hole
table
For Cable
Drill 40 mm
hole
70
tank
70
Oil
57
190
Oil tank
70
105
For Din Base
table
Drill 9 mm
hole
1). Pulleys of motor and machine must properly align.
2). Cable pass through under the working table must be secured to avoid the V-belt to be rubbed.
3). Use the motor base arm to adjust belt’s tensions.
There is against dull design for coupling of
sewing and motor, joint direction must pay
more attention on it.
Clamp sets crew of coupling
must fix in flat surface of shaft or
carve
○
C .
○
F
○
E
○
B
○
A
○
C
○
D