SIRS-E Pilotino WiFi PCB, Инструкция по эксплуатации, Страница: 17 / 20

8. Wi-Fi - Station Mode
8.1 Network Connection (WPS)
The Station mode is when the P WiFi™ PCB connects to a near by wireless internet router. A blue indicator LED
ILOTINO
on the P WiFi™ PCB turns steady. This allows for a complete wireless solution for a smartphone to act as a DMX
ILOTINO
controller. With the Station Mode, the router can connect to multiple P WiFi™ PCB with a combination of basic
ILOTINO
connection and daisy chain connections. Very user friendly when working on different projects from residential to a
business., or personal use.
After turning on the power to the P WiFi™ PCB, a green indicator LED turns steady.
ILOTINO
After a few seconds, the indicator LED turns from green to cyan; the P ™’s internal WiFi network is ready
ILOTINO
to pair.
On a near by wireless router, press the WPS button to initialized scanning for new devices.
Locate the paring button, on the P
WiFi™ PCB, then press and hold the button until the LED
ILOTINO
changes color, from cyan to white.
A steady blue indicator LED is shown on the P
WiFi™ PCB representing a successful connection
ILOTINO
with a wireless router.
A slow flashing white indicator LED is shown on the P
WiFi™ PCB representing a failed connection
ILOTINO
with a wireless router. In this case, repeat the WPS procedure.
Perform the same operation for all P
WiFi™ PCB
ILOTINO
17
3307 West Street Rosenberg, TX 77471 USA - (281) 324-0908
Copyright © 2006-2021 SIRS Electronics Inc. All Rights Reserved
P WiFi™ PCB Instruction Manual
ILOTINO
Updated 12/2021. Rev 2.7