The Access Point (default mode) is the P
WiFi™ PCB acting as its own network. A cyan indicator LED turns steady
ILOTINO
on the P
WiFi™ PCB. This allows for a complete wireless solution for a smartphone to act as a DMX controller.
ILOTINO
7. Wi-Fi - Access Point Mode
7.1 Basic Connection
7.1 Basic Connection
7.1 Network Connection
7.2 Art-Net App Connection
Art-Net App works on any compatible IOS or Android
When connecting the Art-Net App, make sure that the device being used is connected to the same WiFi network
that the P
WiFi™ PCB
ILOTINO
is broadcasting
After setting up the App on the smartphone device, a cyan indicator LED on the P
WiFi™ PCB will blink slowly
ILOTINO
Art-Net signal present!
After turning on the power to the P
WiFi™ PCB, a green indicator LED turns steady.
ILOTINO
After a few seconds, the indicator LED turns from green to cyan; the P
™’s internal WiFi network is
ILOTINO
now ready to pair.
With the smartphone device, go to the “Settings -> WiFi/Network -> PilotWiFi_####, where #### is a
random sequence of four numbers.
When first prompted for a password, type PilotWiFi_0000
16
3307 West Street Rosenberg, TX 77471 USA - (281) 324-0908
Copyright © 2006-2021 SIRS Electronics Inc. All Rights Reserved
P
WiFi™ PCB Instruction Manual
ILOTINO
Updated 12/2021. Rev 2.7
Содержание Pilotino WiFi PCB
Страница 1: ...E518483 ...